Related Manuals for Hilti AG500-A18
Summary of Contents for Hilti AG500-A18
- Page 1 AG 500-A18 Operating instructions Mode d’emploi Manual de instrucciones Manual de instruções Printed: 26.03.2015 | Doc-Nr: PUB / 5129835 / 000 / 01...
- Page 2 This Product is Certified Ce produit est homologué Producto homologado por Este produto está registrado C US Printed: 26.03.2015 | Doc-Nr: PUB / 5129835 / 000 / 01...
-
Page 7: Table Of Contents
ORIGINAL OPERATING INSTRUCTIONS AG 500-A18 angle grinder 1 These numbers refer to the illustrations. You can It is essential that the operating instructions find the illustrations at the beginning of the operating are read before the power tool is operated for instructions. -
Page 8: Safety Instructions
Make a note of this data in your operating instructions and always refer to it when making an enquiry to your Hilti representative or service department. Rated speed Revolutions Revolutions... - Page 9 away from moving parts. Loose clothes, jewellery 2.1.6 Service or long hair can be caught in moving parts. a) Have your power tool serviced by a qualified repair g) If devices are provided for the connection of dust person using only identical replacement parts. extraction and collection facilities, ensure these This will ensure that the safety of the power tool is are connected and properly used.
- Page 10 tions. The dust mask or respirator must be capable of control torque reactions or kickback forces, if proper filtrating particles generated by your operation. Pro- precautions are taken. longed exposure to high intensity noise may cause b) Never place your hand near the rotating acces- hearing loss.
- Page 11 Hilti Service Avoid touching rotating parts. Switch the power Center. Under unfavorable circumstances, damp- tool on only after bringing it into position at the ness or dust adhering to the surface of the tool, workpiece.
-
Page 12: Description
It is recommended that a dust removal system consisting of matched components, i.e. dust removal hood and a suitable Hilti vacuum cleaner, are used for working on mineral materials such as concrete or stone. These serve to protect the operator and increase the life of the power tool and disc used. -
Page 13: Consumables
3.4 Temperature-dependent motor protection The temperature-dependent motor protection system prevents the power tool overheating by monitoring current input and motor temperature. In the event of motor overload due to application of excessive pressure to the disc, performance will drop noticeably or the power tool may stop running (avoid stalling the power tool in this way). -
Page 14: Technical Data
Assignment of discs to the equipment used Item Equipment AF-D AN-D AC‑D AG-D DC‑D DG‑CW 3CS/3SS/4CS/4SS Guard Front cover (in combination with DG‑EX 125/5" sur- face guard DC‑EX 125/5"-C compact guard (in combination with Side handle DC BG 125 hoop grip (optional for E) Clamping nut (not for use with... -
Page 15: Before Use
6 Before use Rotate the guard until it engages and the guard 6.1 Inserting the battery 5 release button jumps back into its original position. CAUTION Check that the power tool is switched off and the 6.5.1.1 Adjusting the guard switch interlock activated before fitting the battery. -
Page 16: Operation
CAUTION The spindle lockbutton may be 6.7.1 Fitting discs using the Kwik lock clamping pressed only when drive spindle nut 12 motionless. There is otherwise a risk of causing NOTE irreparable damage to the gearing or that the disc The arrow on the upper surface of the nut must be within works loose. -
Page 17: Care And Maintenance
- Charge the batteries using the specified and approved electrical hazards. Clean the outside of the power tool at Hilti battery chargers for Li‑ion batteries. regular intervals with a slightly damp cloth. Do not use a spray, steam pressure cleaning equipment or running 8.3 Checking the power tool after care and... -
Page 18: Disposal
Batteries that have reached the end of their life must be disposed of in accordance with national regulations or returned to Hilti. Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old power tools or appliances for recycling. - Page 19 Hilti Corporation LI-9494 Schaan Tel.: +423 / 234 21 11 Fax: +423 / 234 29 65 www.hilti.com Hilti = registered trademark of Hilti Corp., Schaan Pos. 3 | 20150305 Printed: 26.03.2015 | Doc-Nr: PUB / 5129835 / 000 / 01...
Need help?
Do you have a question about the AG500-A18 and is the answer not in the manual?
Questions and answers