How To Initialize The Dvd Recorder - FUNAI DR-A2601 Service Manual

HOW TO INITIALIZE THE DVD RECORDER

To put the program back at the factory-default,
initialize the DVD recorder as the following procedure.
1. Turn the DVD recorder on.
2. Confirm that no disc is loaded or that the disc tray
is open. To put the DVD recorder into the Version
display mode, press [CM SKIP], [1], [2], and [3]
buttons on the remote control in that order.
Fig. a appears on the screen.
*1: " ******* " differs depending on the models.
*2: Firmware Version differs depending on the
models, and this indication is one example.
F/W VERSION
Model Name : *******
Firmware Version
BE : R2E2972S2S
FE : R20_048_000
API : Ver 1.08
TT : T20191FSP
DEFAULT SETTING : ENTER
EXIT : RETURN
Fig. a Version Display Mode Screen
3. Press [ENTER] button, then the DVD recorder
starts initializing. When the initializing is
completed, the DVD recorder exits the Version
display mode and turns off the power
automatically.
* To move into the Normal mode from the
Version display mode, press [RETURN] button
on the remote control instead of [ENTER]
button.
* When [STANDBY-ON] button is pressed
before [ENTER] button is pressed, the DVD
recorder exits the Version display mode, then
the power turns off.
1-6-1 E6820INT