Filling The Solution Tank - Windsor Cadet 7 CDT7I Operating Instructions Manual

Filling the Solution Tank

NOTE: Use clean bucket of water to fill solution tank.
Do not put defoamer, solvents, spotter or pre-spray chemicals in the solution tank.
Do not allow water to spill into vacuum motor inlet. Dry spillage from top of solution tank before replacing
recovery tank.
Suitable Chemicals
Alkalis
Detergents
Hydroxides
Soaps
Vinegar
* Product Trademark Names
8-640-407-0 Manual, Operators CDT7I - 230V
Non-Compatible Chemicals
Aldehydes
Aromatic Hydrocarbons
SP Butyls
Carbon Tetrachloride
Clorox*
Chlorinated Bleaches
Chlorinated Hydrocarbons
Lysol*
Methyl Ethel Ketone (MEK)
Perchorethylene (perc)
Phenolics
Trichlorethylene
D-Limonene
Operations
17