Part 3: Using your machine
*Plug your toaster into a suitable
mains supply, place the bread to be
toasted into the bread slot.
*Set the browning control (Figure 1)
to the desired setting and fully
depress the lever (Figure 2), this
will switch on the appliance.The
browning control may be rotated to
vary the toasting time and therefore
the degree of browning.To increase
the browning, rotate the browning
control button (Figure 3) clockwise
and counterclockwise to reduce
browning.
*As soon as the toasting cycle is
complete, the toasted items will "pop
up" ready for use.
Note : For toasting small or awkward
items the bread carriage mechanism
has been designed to include an
"Extra Lift" future. After the cycle
has finished with the carriage in its
normal upper position, simply lift the
Attention!
carriage lever to the top of its travel,
this will allow easy removal or the
In case of damaging the power
small or awkward items (Figure 5).
cord repairingshould be only by
*If you wish to cancel the toasting
authorized service.
cycle at any stage during its
During operation high
operation, depress the cancel button
temperatures on touchable
(Figure 4).
*After using the toaster, disconnect
surfaces could occur.
your toaster by switching off at the
mains supply or removing plug.
3
2
3
4
2
1
1
Figure 1
Figure 2
4
5
6
Figure 3
Figure 4
5
Figure 5