Table of Contents
Advertisement
Composite-ARF Yak-55 SP (2.6m span)
Here is a list of the things you may need to get your Composite-ARF Yak-55SP in the air. Some
of them are mandatory, some of them can be chosen by you. What we list here are highly
recommended parts, and have been thoroughly tested.
1.
Power servos (min. 8 required). We highly recommend JR 8411's for the ailerons and
elevators, and either 8411 or 8511/8611's for the rudder.
2.
Throttle servo (1) Any standard servo will do (eg: JR/Graupner 4041)
3.
Aluminium Spinner 125 - 140mm dia (5 - 5.75"). eg: Tru-Turn.
4.
Main wheels 125 mm ( 5"). Dubro wheels are recommended.
5.
Engine DA-100. This is the recommended engine for your Yak-55SP. The instructions
refer to that engine throughout, but you could use any other 80 - 100cc engine.
6.
Mini-Pipe or Tuned-pipe set. (Incls: 2 canisters/pipes, 2 aluminium or stainless-steel
headers, 2 Teflon couplers, 4 spring clamps, & mounting hardware. Available from C-ARF)
7.
Standard exhaust muffler. (optional, if noise is not a problem at your field)
8.
High quality heavy-duty servo extension cables, with gold connectors. High quality
receiver and ignition switches, 'Y' leads, ceramic/ferrite chokes etc.
9.
Receiver battery. Either one 2800 mAH pack, or 2 x 1800 mAH packs if preferred.
10.
Powerbox 40/24 or Professional and dual powerswitches for dual batteries if preferred.
11.
Fuel tank (900 - 1000 ml) with gasoline stopper. We use Dubro.
12.
Cable ties in various lengths.
13.
Propeller. 2-blade Carbon Meijzlik or Menz 28" x10" for DA-100.
Did you read the hints and warnings above and the instructions carefully?
Did you understand everything in this manual completely?
Then, and only then, let's start assembling your Composite-ARF Yak-55 SP.
If not, please read it again before you start the assembly.
Accessories
11
techsupport@composite-arf.com
Advertisement
Table of Contents
