Firmware Update Commands - Accusys eXpeRAID User Manual

TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT "DESKTOP RAID"
REV. G–05-NOV-2007

3.3.7 Firmware Update Commands

3.3.7.1
Command Name
UpdateSystemCode
Parameter 1
File Path:
<[DIR] <FileName>>
3.3.7.2
Command Name
UpdateBootCode
Parameter 1
File Path:
<[DIR] <FileName>>
3.3.7.3
Command Name
UpdateBIOSEFI
Parameter 1
File Path:
<[DIR] <FileName>>
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
Command Description
Update system code for the active controller. The controller needs to be
restarted for the new system code to take effect.
Parameter Description
File Path:
Specify an existing System Code image file(FileName) located in the
specified directory.
Command Description
Update boot code for the active controller. The controller needs to be
restarted for the new boot code to take effect.
Parameter Description
File Path:
Specify an existing Boot Code image file(FileName) located in the
specified directory.
Command Description
Update BIOS and EFI firmware for the active controller. The controller
needs to be restarted for the new BIOS/EFI to take effect.
Parameter Description
File Path:
Specify an existing BIOS/EFI image file(FileName) located in the
specified directory.
ACCUSYS, INC.
DOCUMENT STATUS OFFICIAL RELEASE
PAGE 26 OF 27