Table of Contents
Advertisement
TITLE
EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT
"DESKTOP RAID"
REV.
G–05-NOV-2007
3.3.1.4
Command Name
SetPassword
Parameter 1
Password:
<CHARS>
3.3.1.5
Command Name
CtrlName
Parameter 1
Controller Name:
<CHARS>
3.3.1.6
Command Name
RunScript
Parameter 1
File Path:
<[DIR] <FileName>>
3.3.1.7
Command Name
Exit
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
Command Description
Use this command to set password of the active controller.
Parameter Description
Password:
CHARS must be an 8-character alphabetic string.
Command Description
Use this command to set controller name of the active controller.
Parameter Description
Controller Name:
CHARS may not exceed 16 characters.
Example
CLI>CtrlName Ctrl1 [Enter]
The controller name will be set to 'Ctrl1'. If the number of characters
in parameter 1 is more than 16, the additional characters will be
ignored.
Command Description
Use this command to run CLI commands from a pre-written script file.
Parameter Description
File Path:
Specify an existing script file(FileName) located in the specified
directory.
Example(Under Linux environment)
CLI> RunScript /tmp/script1 [Enter]
CLI will start to run commands written in the script file 'script1'
Command Description
Use this command to quit CLI command line interface.
Parameter Description
N/A
ACCUSYS, INC.
DOCUMENT STATUS
OFFICIAL RELEASE
PAGE 13 OF 27
Advertisement
Table of Contents
