Table of Contents
Advertisement
TITLE
EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT
"DESKTOP RAID"
REV.
G–05-NOV-2007
3.3.6.4
Command Name
SMARTPollingPeriod
Parameter 1
Polling Time:
<1Min:15Min:30Min:
60Min:2Hr:4Hr:8Hr>
3.3.6.5
Command Name
BeeperMode
Parameter 1
<Enable:Disable>
3.3.6.6
Command Name
EQMode
Parameter 1
<Enable:Disable>
3.3.6.7
Command Name
CtrlCache
Parameter 1
<Enable:Disable>
3.3.6.8
Command Name
SyncCacheMode
Parameter 1
<Enable:Disable>
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
Command Description
Use this command to set the polling frequency of SMART pre-failure
warning mode.
Parameter Description
Polling Time:
Set Polling Time as the SMART polling period.
Command Description
Use this command to enable or disable the controller beeper.
Parameter Description
Enable/Disable controller beeper.
Command Description
Use this command to enable or disable Equalization Mode.
Parameter Description
Enable / Disable Equalization Mode.
Command Description
Use this command to enable or disable controller cache.
Parameter Description
Enable/Disable controller cache.
Command Description
Use this command to enable or disable Synchronize Cache mode.
Parameter Description
Enable/Disable Synchronize Cache mode.
ACCUSYS, INC.
DOCUMENT STATUS
OFFICIAL RELEASE
PAGE 24 OF 27
Advertisement
Table of Contents
