TITLE
EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT
"DESKTOP RAID"
REV.
G–05-NOV-2007
3.3.5.6
Command Name
CancelSplitSchedule
Parameter 1
Shot No.:
<1~8>
3.3.6 Miscellaneous Commands
3.3.6.1
Command Name
DiskLagProof
Parameter 1
<Enable:Disable>
3.3.6.2
Command Name
NCQMode
Parameter 1
<Enable:Disable>
3.3.6.3
Command Name
SMARTMode
Parameter 1
<Enable:Disable>
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
Command Description
Use this command to cancel split schedule for the specified mirror
snapshot.
Parameter Description
Shot No.:
Specify an existing mirror snapshot to cancel schedule.
Command Description
Use this command to enable or disable Disk Lag Proof mode. This
mode is only effective on RAID Level 5.
Parameter Description
Enable / Disable Disk Lag Proof mode.
Command Description
Use this command to enable or disable NCQ(native command queue)
mode.
Parameter Description
Enable / Disable NCQ mode.
Command Description
Use this command to enable or disable SMART pre-failure warning
mode.
Parameter Description
Enable / Disable SMART pre-failure warning mode.
ACCUSYS, INC.
DOCUMENT STATUS
OFFICIAL RELEASE
PAGE 23 OF 27