Refreshpriority; Unlockdrive; Mirror Snapshot Configuration Commands; Createshot - Accusys eXpeRAID User Manual

TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT "DESKTOP RAID"
REV. G–05-NOV-2007
3.3.4.6
Command Name

RefreshPriority

Parameter 1
<High:Medium:Low>
3.3.4.7
Command Name

UnlockDrive

Parameter 1
Drive No.:
<1~n>

3.3.5 Mirror Snapshot Configuration Commands

3.3.5.1
Command Name

CreateShot

Parameter 1
Shot No.:
<Shot=<1~8>>
Parameter 2
Source Array No.:
<SourceArray=<1~4>:
SourceJBOD=<1~n>>
Parameter 3
Source Slice No.:
<SourceSlice= <0~15>>
Parameter 4
Backup Array No.:
<BackupArray =<1~4>:
BackupJBOD=<1~n>>
Parameter 5
Backup Slice No.:
<BackupSlice= <0~15>>
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
Command Description
Use this command to set the priority of array refreshment. This setting
would be applied to all arrays which are being refreshed.
Parameter Description
Select the priority for array refreshment function.
Command Description
Use this command to unlock a locked drive.
Parameter Description
Drive No.:
<1~n>, where n stands for the maximum locked drive number.
Command Description
Use this command to create a mirror snapshot.
Parameter Description
Shot No.:
Specify the mirror snapshot number to be created.
Source Array No.:
SourceArray =1~4, uses an array as the source shot.
SourceJBOD=1~n, uses JBOD as the source shot.
Backup Array No.:
BackupArray =1~4, uses an array as the backup shot.
BackupJBOD=1~n, uses JBOD as the backup shot.
Slice No.:
This parameter is not needed when parameter 2 or parameter 4 uses
JBOD.
Example
CLI>CreateShot
BackupJBOD =1 [Enter]
Shot 1 will be created and data in slice 0 of Array 1 will start to backup
to JBOD1 if all parameters meet legal conditions.
ACCUSYS, INC.
DOCUMENT STATUS
Shot=1 SourceArray=1
OFFICIAL RELEASE
PAGE 21 OF 27
SourceSlice=0