Table of Contents
Advertisement
TITLE
EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT
"DESKTOP RAID"
REV.
G–05-NOV-2007
3.3 CLI Command Set
3.3.1 Basic CLI Commands
3.3.1.1
Command Name
Main
3.3.1.2
Command Name
CtrlIndex
Parameter 1
Controller index:
<0~n>
3.3.1.3
Command Name
CheckPassword
Parameter 1
Password:
<CHARS>
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
Command Description
Use this command to show the main information page, which lists all
available CLI commands with brief descriptions.
Parameter Description
N/A
Command Description
Use this command to set a specified controller to be active. The default
controller will be set to controller 0 if it exists.
Parameter Description
Controller index:
<0~n>, where n stands for the maximum index number of the available
controller(s).
Command Description
Use this command to verify password of the active controller. The
controller commands can only be issued after the password being
verified.
Parameter Description
Password:
CHARS must be an 8-character alphabetic string.
Example
CLI>CheckPassword 00000000 [Enter]
If 00000000 is a correct password for the active controller, then CLI
will return success and the controller can receive commands normally
after that.
ACCUSYS, INC.
DOCUMENT STATUS
OFFICIAL RELEASE
PAGE 12 OF 27
Advertisement
Table of Contents
