Loading Standard Trays And Optional Trays - Lexmark C920 User Manual

Loading standard trays and optional trays

Your printer has a 550-sheet standard tray. You may have also purchased one or more 550-sheet optional trays. The steps
for loading a standard or optional tray are the same.
To load print media:
1
Open the tray.
2
Squeeze the side guide tab, and position the guide for the size media you are using.
3
Flex the sheets back and forth to loosen them, then fan them. Do not fold or crease the print media. Straighten the
edges on a level surface.
4
Place the print media face down in the tray. For duplex (two-sided) printing on letterhead, place the print media
face up in the tray.
5
Squeeze the front guide tab, and slide the guide toward the inside of the tray until it lightly rests against the edge
of the media.
Downloaded From ManualsPrinter.com Manuals
Note: The steps for loading an optional high capacity feeder are different than the steps for loading a 550-
sheet tray.
Note: Do not remove a tray when a job is printing or when the operator panel indicator light is blinking. Doing
so may cause a jam.
Note: Do not fill paper above the load line. Overfilling the tray may cause jams.
Loading standard trays and optional trays
Printing
60