Fini RD 185-810 User Manual page 7

40069 Zola Predosa (BO) - ITALY
1.4 INSTRUCTIONS FOR THE USE OF PRESSURE EQUIPMENT ACCORDING TO
To ensure the safe operation of pressure equipments, the user must conform strictly to the above directive
and the following :
1. The equipment must only be operated within the temperature and pressure limits stated on the
manufacturer's data nameplate.
2. Welding on heat-exchanger is not recommended.
3. The equipment must not be stored in badly ventilated spaces, near a heat source or inflammable
substances.
4. Vibration must be eliminated from the equipment to prevent fatigue failure.
5. Automatic condensate drains should be checked for operation every day to prevent a build up of
condensate in the pressure equipment.
6. The maximum working pressure stated on the manufacturer's data nameplate must not be exceeded.
Prior to use, the user must fit safety / pressure relief devices.
7. All documentation supplied with the equipment (manual, declaration of conformity etc.) must be kept for
future reference.
8. Do not apply weights or external loads on the vessel or its connecting piping.
Users of the equipment must comply with all local and national pressure equipment
legislation in the country of installation.
Check for visible loss or damage, if no visible damage is found place the unit near to the installation point
and unpack the contents.
• Always keep the dryer in the upright vertical position. Damage to components could result if unit is laid
on its side or if placed upside down.
• Store machine in a clean, dry environment, do not expose to severe weather environments.
• Handle with care. Heavy blows could cause irreparable damage.
PED DIRECTIVE 97/23/EC
2.1 TRANSPORT
info@finicompressors.it
- EN -