Definition Of The Conventional Signs Used In This Manual - Fini RD 185-810 User Manual

40069 Zola Predosa (BO) - ITALY

1.1 DEFINITION OF THE CONVENTIONAL SIGNS USED IN THIS MANUAL

Carefully read instruction manual before attempting any service or maintenance procedures on the
dryer.
Caution warning sign. Risk of danger or possibility of damage to equipment, if related text is not
followed properly.
Electrical hazard. Warning message indicates practices or procedures that could result in personal
injury or fatality if not followed correctly.
Danger hazard. Part or system under pressure.
Danger hazard. High temperature conditions exist during operation of system. Avoid contact until
system or component has dissipated heat.
Danger hazard. Treated air is not suitable for breathing purposes; serious injury or fatality may
result if precautions are not followed.
Danger hazard: In case of fire, use an approved fire extinguisher, water is not an acceptable
means in cases of fire.
Danger hazard. Do not operate equipment with panels removed.
Maintenance or control operation to be performed by qualified personnel only 1.
ARIA
AIR
Compressed air inlet connection point.
LUFT
AIR
ARIA
AIR
Compressed air outlet connection point.
LUFT
AIR
Condensate drain connection point.
Cooling water inlet connection point (Water-Cooled).
Cooling water outlet connection point (Water-Cooled).
Operations which can be worked out by the operator of the machine, if qualified
NOTE :
Text that specifies items of note to be taken into account does not involve safety precautions.
In designing this unit a lot of care has been devoted to the environment protection:
• CFC free refrigerants
• CFC free insulation parts
• Energy saving design
• Limited acoustic emission
• Dryer and relevant packaging composed of recyclable materials
Not to spoil our commitment, the user should follow the few ecological suggestions marked with
this sign.
1
Experienced and trained personnel acquainted with the relevant rules and laws, capable to perform the needed activities and to identify and
avoid possible dangerous situations while handling, installing, using and servicing the machine.
info@finicompressors.it
- EN -
1
.