Fini RD 185-810 User Manual page 4

40069 Zola Predosa (BO) - ITALY
1.
SAFETY RULES
1.1 Definition of the Conventional Signs Used in This Manual
1.2 Warnings
1.3 Proper Use of the Dryer
1.4 Instructions for the use of pressure equipment according to PED Directive 97/23/EC
2.
INSTALLATION
2.1 Transport
2.2 Storage
2.3 Installation site
2.4 Installation layout
2.5 Correction factors
2.6 Connection to the Compressed Air System
2.7 Connection to the Cooling Water Network (Water-Cooled)
2.8 Electrical connections
2.9 Condensate Drain
3. START UP
3.1 Preliminary Operations
3.2 First Start Up
3.3 Start-up and shut down
4. TECHNICAL CHARACTERISTICS
4.1 Technical Specifications RD 185-810 /AC (Air-Cooled)
4.2 Technical Specifications RD 185-810 /WC (Water-Cooled)
5.
TECHNICAL DESCRIPTION
5.1 Control panel
5.2 Operation
5.3 Flow Diagram (Air-Cooled)
5.4 Flow Diagram (Water-Cooled)
5.5 Refrigerating compressor
5.6 Condenser (Air-Cooled)
5.7 Condenser (Water-Cooled)
5.8 Condenser water regulating valve (Water-Cooled)
5.9 Filter Drier
5.10 Capillary tube
5.11 Alu-Dry Module
5.12 Hot gas by-pass valve
5.13 Refrigerant Pressure Switches P
5.14 Safety thermo-switch Ts
5.15 Compressor crankcase heater
5.16 DMC14 Electronic Instrument
5.17 DMC20 Electronic Instrument
5.18 Electronic level drain
6.
MAINTENANCE, TROUBLESHOOTING AND DISMANTLING
6.1 Controls and Maintenance
6.2 Troubleshooting
6.3 Maintenance operation on the refrigeration circuit.
6.4 Dismantling of the Dryer
7.
LIST OF ATTACHMENTS
7.1 Dryers Dimensions
7.2 Exploded View
7.3 Electrical Diagram
info@finicompressors.it
-P -P
A B V
- EN -