Packing Instruction - McIntosh MC501 Owner's Manual

Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below. It is very important that the four plastic feet are at-
tached to the bottom of the equipment. Three #10 x 2-1/2
inch screws and washers must be used to fasten the unit
securely to the bottom pad and shipping skid. This will en-
sure the proper equipment location on the bottom pad. Fail-
ure to do this will result in shipping damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please call
or write Customer Service Department of McIntosh Labo-
ratory. Please see the Part List for the correct part numbers.
Quantity Part Number
1 034158
2 034250
1 034198
1 034199
1 034188
1 034037
1 033699
7 017218
4 100159
2 104083
3 101204
3 104033
Packing Instructions
Description
Shipping carton only
Foam end cap
Inner carton top
Inner carton bottom
Foam pad
Inner carton pad
Shipping skid
Plastic foot
#10-32 x 3/4" Machine screw
#10 x 7/16" Flat washer
#10 x 2-1/2" Wood screw
#10 x 1-3/4" Flat washer
19