4.10.4.1.1.1 Quick Setup
Copy function allows you to copy one channel setup to another. After setting in channel 1, click Copy
button, you can go to interface Figure 4-88. You can see current channel name is grey such as channel
1. Now you can select the channel you wan to paste such as channel 5/6/7. If you wan to save current
setup of channel 1 to all channels, you can click the first box "ALL". Click the OK button to save current
copy setup. Click the OK button in the Encode interface, the copy function succeeded.
Figure 4-86
Figure 4-87
138