Table of Contents
Advertisement
On the navigation bar, you can see the Favorites shortcut menu. You can select from the dropdown list.
Click View 1, you can see the channel(s) you saved on the Favorites folder. See Figure 4-106.
4.10.5.3 PTZ
The pan/tilt/zoom setup includes the following items. Please select channel first. See Figure 4-107.
Control mode: You can select control mode from the dropdown list. There are two options:
Serial/HDCVI. For HDCVI series product, please select HDCVI. The control signal is sent to the PTZ
via the coaxial cable. For the serial mode, the control signal is sent to the PTZ via the RS485 port.
Protocol: Please select DH-SD1 if the control mode is HDCVI.
Address: input corresponding PTZ address.
Baud rate: Select baud rate.
Data bit: Select data bit.
Stop bit: Select stop bit.
Parity: There are three choices: none/odd/even.
After completed all the setups please click save button, system goes back to the previous menu.
Figure 4-105
Figure 4-106
151
Advertisement
Table of Contents
