3 Installation and Connections
Note: All the installation and operations here should conform to your local electric
safety rules.
3.1 Check Unpacked DVR
When you receive the DVR from the forwarding agent, please check whether there is any visible
damage. The protective materials used for the package of the DVR can protect most accidental clashes
during transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list. Finally you can remove the protective film of the DVR.
3.2 About Front Panel and Rear Panel
The model label in the front panel is very important; please check according to your purchase order.
The label in the rear panel is very important too. Usually we need you to represent the serial number
when we provide the service after sales.
3.3 HDD Installation
ELI-ECO3-CVIM-
1. Loosen the screws of the
upper cover and side panel.
in the chassis.
4. Turn the device upside down
and then turn the screws in
firmly.
/ ELI-ECO3-CVIM- / ELI-ECO3-CVIM-16
2. Fix four screws in the HDD
(Turn just three rounds).
5.
Fix the HDD firmly.
3. Place the HDD in accordance with
the four holes in the bottom.
6. Connect the HDD cable and
power cable.
71