Table of Contents
Advertisement
Pre-record: System can pre-record the video before the event occurs into the file. The value ranges
from 1 to 30 seconds depending on the bit stream .
Redundancy: System supports redundancy backup function. You can highlight Redundancy button
to activate this function. Please note, before enable this function, please set at least one HDD as
redundant. (Main menu->Setting->Storage->HDD Manager). Please note this function is null if
there is only one HDD.
Period setup: Click button
Figure 4-87.There are four record types: regular, motion detection (MD), Alarm, MD & alarm.
Please following the steps listed below to draw the period manually.
Select a channel you want to set. See Figure 4-83.
Set record type. See Figure 4-84.
Please draw manually to set record period. There are six periods in one day. See Figure 4-85.
Please highlight icon
click save button, system goes back to the previous menu.
There are color bars for your reference. Green color stands for regular recording, yellow color
stands for motion detection and red color stands for alarm recording. The white means the MD and
alarm record is valid. Once you have set to record when the MD and alarm occurs, system will not
record neither motion detect occurs nor the alarm occurs.
after one date or a holiday, you can see an interface shown as in
Figure 4-83
Figure 4-84
Figure 4-85
to select the corresponding function. After completing all the setups please
137
Advertisement
Table of Contents
