Software Installation - KPN USB-modem User Manual

3. Connect the USB-modem to your PC:
• Then connect the USB-modem to the USB port and ensure that it is tightly inserted.
• The modem will be automatically recognized.
• The system will automatically detect and recognize the new hardware and display the new icon in the desktop
status bar, indicating that the computer and the USB-modem have been connected properly. After a few
seconds, the installation program will start automatically.

2.3 Software Installation

The system will automatically detect and recognize the new hardware and display the new icon in the desktop
status bar, indicating that the computer and the USB-modem have been connected properly. After a few seconds,
there will show the following installation interface if the laptop and desktop PC supports automatic installation.
If the laptop and desktop PC doesn't support automatic installation, start the installation program by run the
"AutoRun.exe" from the CD-ROM drive. The following installation interface will show how to start installation.
Select the language according to the operating system and click "Next". and then you will see the following
screen will popup:
Choose the language then click "OK". the following screen will shows up:
9