Run The Application Software; Hardware Uninstall - KPN USB-modem User Manual

2.4 Run the Application Software

After the modem is correctly connected, click the "Start » Programs » KPN Mobile Connect » KPN Mobile Connect"
menu on the laptop and desktop PC to run the application software. Or double click the shortcut icon, to run the
following application software.
After modem initialized, main interface appears. When the standby icon appears in the taskbar, the modem
can work properly

2.5 Hardware Uninstall

Close the software application then remove the hardware following the procedure below.
- Firstly click the "close" menu, and then click "OK" to close the software.
- For example in Windows XP, right click the icon from windows taskbar, the following menu shows:
Now you can safely remove your USB-modem. When you use a MicroSD card in the modem, please left click the
icon in the Windows system tray bar. Then a menu will popup and indicates the USB devices list as below:
Select "Safely remove the USB disk", which is relevant to the MicroSD card. Pull it off the USB cable directly, if you
want to disconnect the modem from the laptop and desktop PC. Then you can pull the USB stick out from the
laptop or desktop PC SUB slot.
13