Advertisement
Quick installation guide
1) Insert the SIM/USIM card into the USB-modem:
• To install SIM/USIM card, first take down the modem cover, then the USB connector is visible.
Pull the plastic socket above the USB connector a little out.
• Then insert the SIM/USIM card into the socket.
Make sure that metal contact facing to the modem. Please refer to the following picture,
insert the SIM/USIM card smoothly into the modem, with the cutted edge into the stick.
2) Install the Micro-SD memorycard into the USB-modem:
Install Micro-SD memory-card in the USB-modem, if you want to use it.
• Insert the Micro-SD into the SD slot from the side of the modem.
The following picture indicates the correct inserting direction.
The driver of the Micro-SD card will installed automatically when the
modem driver is installed.
Note: Micro-SD memory-cards with a maximum storage capacity of 4GB are supported.
3) Connect the USB-modem to your PC:
• Connect the USB-Stick to the USB port and ensure that it is tightly inserted.
• The modem will be atomically recognized, after that drivers and dashboard software will be correctly installed.
• The computer system will automatically detect and recognize the new hardware and display the new icon in the
desktop status bar, indicating that the computer and the USB-modem have been connected properly. After a few
seconds, the installation program will start automatically.
Advertisement
