Advertisement
Installation/Uninstallation Guide
Under different operating systems (OSs), the installation and uninstallation
procedures may differ. If there is any difference, follow the actual installation
prompts.
Connecting the KPN MIM802 with a Computer
Note: First, power on a computer. Then connect the KPN MIM802 with the
computer. Otherwise, the normal installation of the KPN MIM802 can be
affected.
You can connect the KPN MIM802 to a computer with the USB data cable or the
USB adapter. Two data cables are provided. One is short and single-ended. The
other is long and double-ended. Generally, the single-ended data cable is used. If
the power supply to the KPN MIM802 is not enough, use the double-ended data
cable instead.
Note: If the power supply to the KPN MIM802 is not enough, the KPN MIM802
cannot work normally.
The following figure shows the double-ended data cable.
1
1.
Auxiliary USB data cable
2.
Main USB data cable
3.
Mini-USB Connector
Plug the mini-universal series bus (USB) connector into the KPN MIM802.
MIM802 Quick Start Manual, V1.0
2
3
Page 6 of 14
Advertisement
