Related Manuals for Monte Carlo Fan Company 5WF52XXD-L Series
Summary of Contents for Monte Carlo Fan Company 5WF52XXD-L Series
- Page 1 ’ WNER ANUAL Ceiling Fan Installation Instructions For 5WF52XXD-L Series Fans READ AND SAVE THESE INSTRUCTIONS Total fan weight with light kit...
-
Page 2: Installation
Installation AFETY WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes ANSI/NFPA 70-1999), including fire-rated construction. - Page 3 Loosen set screws with locking nuts and Install downrod to canopy and then install yoke Install downrod with canopy and yoke covers remove keeper from pin and then pin from cover to downrod. Thread wires and safety into yoke. Align hole in downrod and yoke, yoke for downrod (see inset).
- Page 4 Install keeper nut over lead wires. Install switch housing to light kit by Tighen keeper nut onto threaded turning clockwise to tighten. pipe from the light kit. Locate blue and white wire from the fan Attach switch cap to fan by lining up Install 2 x 13 watt (E27) based marked “For light kit”.
-
Page 5: Troubleshooting
ROUBLE HOOTING If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart.
Need help?
Do you have a question about the 5WF52XXD-L Series and is the answer not in the manual?
Questions and answers