Table of Contents
Advertisement
o Place the appliance flatly and firmly on a solid base. The
appliance is fitted with adjustable feet on the front side, which
can be used to level the appliance.
o To ensure proper ventilation for your freezer, there should be a
gap of at least 2 cm on each side between walls, 2 cm between
the back of the freezer and the wall and 3 cm between the top
and the roof or ceiling.
o If you are placing another cooling appliance next door to this
product, then there must be a gap of at least 2 cm between the
appliances. This will help to prevent condensation from forming.
o Be sure to leave enough space for the opening of the door, to
avoid damage to the appliance or personal injury.
Levelling the appliance
o If the freezer is not levelled during installation, the doors may
not close or seal properly causing cooling, frost or moisture
problems.
o To level your freezer you may either turn the levelling foot
clockwise to raise that side of the freezer or anti-clockwise to
lower that side.
WARNING: This process should be carried out by two people.
While one person adjusts the levelling foot, the other should
push against the top of the freezer to take some weight off the
levelling foot. This makes it easier to adjust the levelling foot.
Reversing the door
IMPORTANT: BEFORE COMMENCING THE DOOR REVERSAL
PROCESS THE APPLIANCE MUST BE DISCONNECTED FROM
YOUR MAINS SUPPLY.
o We suggest that two people complete the door reversal process.
o We recommend that the door reversal process is done before the
appliance is placed in its final position.
o If food is already stored inside of it, then this must all be
removed before beginning the door reversal process.
TOOLS REQUIRED
o Phillips style screwdriver
o Flat bladed screwdriver
1. Switch off the appliance at the socket and unplug it.
17
Advertisement
Table of Contents
