Installing Rock Media And Ember Material - Heat & Glo PALOMA-BZ-MOD Owner's Manual

H. Installing Rock Media and Ember Material
CAUTION! Risk of Cuts or Abrasions. Wear protective
gloves and safety glasses during installation.
REAR ROCK
CLUSTER
LEFT ROCK
CLUSTER
Figure 1. Rock Kit Components
KIT CONTENTS
(1) Rear Rock Cluster
(1) Left Rock Cluster
(1) Right Rock Cluster
(1 ) Bag Ember Material
!
Delayed Ignition Risk
• Place rock clusters according to instructions.
• Do NOT place rock clusters in a position that they
cover burner ports.
• Do NOT use any media other than the rock
clusters supplied with this fireplace.
Fireplace will not function properly.
Delayed ignition may occur.
35 Heat & Glo • PALOMA-BZ-MOD, PALOMA-GR-MOD, PALOMA-GY-MOD • 2189-900 R14 • 11/14
NOTCHES ON
REAR ROCK
CLUSTER
RIGHT ROCK
CLUSTER
WARNING
INSTALLATION
1. Place the rear rock cluster in the firebox as shown in
Figure 2. The flat portion should fit tight against the
back of the firebox. Slide cluster to the right. There are
notches on the bottom of the rock cluster that should fit
over the base pan. Cluster should rest on burner and
base pan.
NOTCHES ON
REAR ROCK
CLUSTER
Figure 2. Placing Rear Rock Cluster
2. Place right rock cluster in firebox as shown in Figure 3.
The right end of the cluster should touch the right wall
of the firebox. Push cluster back until the rear and right
rock clusters touch as shown in Figure 4. Ensure the rock
clusters are not covering any burner ports.
Figure 3. Placing Right Rock Cluster
RIGHT ROCK
CLUSTER