Leveling And Lagging Down The Appliance; Accessories - Heat & Glo PALOMA-BZ-MOD Owner's Manual

C. Leveling and Lagging Down the Appliance
Lagging the appliance down is REQUIRED.
!
Fire Risk.
Odor Risk.
Tipping Risk
• Install gas stove on a stable, level platform/floor
strong enough to support gas stove without
tipping.
• USE wood flooring, ceramic tile, brick hearth or
high pressure laminate flooring applied directly
over the sub-flooring material.
Securing holes
Level
screw
Lag bolt hole
Figure 8.3
Figure 8.4
After unbolting the appliance from the pallet, insert two 1/4
20 x 1/1/2 counters crews.
Using pliers, adjust the counters crews to level the appliance.
32 Heat & Glo • PALOMA-BZ-MOD, PALOMA-GR-MOD, PALOMA-GY-MOD • 2189-900 R14 • 11/14
WARNING
Level
screw
Figure 8.5
Place the lag bolt from the component bag in the center hole
in the bottom plate (lagging clearance hole). The appliance
must be lagged down securely to prevent tipping forward.
Figure 8.6
Using pliers, adjust the counters crews to level the appliance.
D. Accessories
Install approved accessories per instructions included
with accessories. See Service Parts List for appropriate
accessories. Refer to Section 12.
!
Shock or fire risk.
Use ONLY optional accessories approved for this
appliance.
• Using non-listed accessories voids warranty.
• Using non-listed accessories may result in a safety
hazard.
• Only Hearth & Home Technologies approved
accessories may be used safely.
LAGGING
CLEARANCE
HOLE
WARNING