TRENDnet TPE-1620WS Quick Installation Manual page 4

6. Click System and then click IPv4 Setup.
7. Configure the switch to match the requirements of your network. Then click Apply.
8. Click OK.
9. Click Save Settings to Flash (on the menu bar).
10. Click Save Settings to Flash (button).
11. Click OK.
Note:
If you would like to easily discover all the Web Management Switches on the network, assign IP
Address, change the password, and upgrade new firmware, then install the Web Smart Switch
Management Utility. Follow the steps provided on the User's Guide.
For detailed information regarding the TPE-1620WS's configuration and advanced settings, please
refer to the User's Guide on the provided CD-ROM.
3