Advertisement
19
Install 3 screws to install light pan.
21
Attach glass by locating dimples in
light fixture with the groves in glass
and twisting clockwise till tight.
for fan with light kit go
to step 20-21 to
finish.
for fan without light kit
go to step 22.
22
Attach the non light cover by locating
dimples in the light fixture with the
grooves in the non light kit cover and
twist clockwise till tight. WaRNING:
Make sure light bulb is not installed
when using this cover.
20
Install 75 watt halogen bulb. Do not touch
bulb surface as oily residue from skin can
cause the bulb to explode. Bulb Included.
WaRNING: Over lamping the
fan will result in the fan lights
shutting down until the proper
wattage of bulbs are installed.
Reset the lights by turning off the
wall switch, breaker,or by remote.
Replace bulbs with the correct
wattage bulbs, turn the power on.
Advertisement
