Kenmore 790.7804 Use & Care Manual page 8

GROUNDING INSTRUCTIONS
Avoid fire hazard or electrical
shock. Do not use an adapter plug, an
extension cord, or remove grounding prong
from electrical power cord. Failure to follow
this warning can cause serious injury, fire or
death.
This appliance is equipped with a 3-prong
grounding plug for your protection against
shock hazard and should be plugged directly
into a properly grounded receptacle. Do not
cut or remove the grounding prong from this
plug.
For personal safety, the range must be
properly grounded. For maximum safety, the
power cord must be plugged into an elec-
trical outlet that is correctly polarized and
properly grounded.
If a 2-prong wall receptacle is the only
available outlet, it is the personal responsi-
bility of the consumer to have it replaced
with a properly grounded 3-prong wall
receptacle installed by a qualified electri-
cian.
Grounding type
wall receptacle
Figure 1: Grounding type wall receptacle
See the installation instructions packaged
with this range for complete installation and
grounding instructions.
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this appliance.
Do not cut, remove, or
bypass the grounding
plug under any
circumstances.
Power supply
cord with 3-prong
grounding plug
Save these instructions for future reference.
PRODUCT RECORD
In this space below, record the date of
purchase, model and serial number of your
product. You will find the model and serial
number printed on an identification plate.
See Figure 2 for serial plate location.
Model No. __________________________
Serial No. ___________________________
Date of Purchase _____________________
Save sales receipt for future reference.
Figure 2: Serial plate location
To locate the serial plate, open the lower
oven door. The serial plate is attached to the
side of the oven frame.
8