Table of Contents
Advertisement
The following image (Figure 21) is an example of an image focused enough to ensure a remote one-touch
focus can be completed.
NOTE: A desiccant pack is provided for placement inside the lens cover assembly. The desiccant pack
must be installed to prevent fogging of the inside of the lens glass due to any moisture that is present
when installing the camera.
9. Position the supplied desiccant pack above the lens and wrap it around
the lens between the lens and the lens ring. The desiccant pack must be
placed next to the lens within the inner chamber of the lens cover.
NOTE: Do not tuck desiccant pack into the outer chamber of the lens cover.
10. Clean all glass surfaces, including the surface of the lens, and
the inside and outside of the lens cover, using a lens polishing cloth and
approved lens / glass cleaning solution.
11. Carefully replace the lens cover, ensuring that no portion of the desiccant
pack obscures the lens or protrudes beyond the inner lens chamber.
12. When the lens adjustments are complete, reinstall the lens cover and
tighten the two (2) screws with the supplied Allen wrench. It is not
necessary to apply significant force to tighten the lens cover screws. Once
they are snug, turn an extra ½ turn. Overtightening the screws may affect
the camera focus.
13. On the Focus tab click the One-Touch Focus button to focus the video
image (Figure 22).
Figure 21
Figure 22
15
Advertisement
Table of Contents
