Connecting The Remote Display - Talaris ntegra 177-0800 User Manual

Ntegra Options
6.3.1

Connecting the Remote Display

Plug one end of the provided interface cable into the socket on the rear of the
Remote Display.
Plug the other end of the interface cable into the C/D port on the rear of the
Ntegra.
Count totals and values shown on the Ntegra display will also be shown on the
Remote Display; count total on the top line, and the value total shown on the
bottom line.
The data shown on the Remote display can be cleared ( blanked ) by pressing the
Clear button on the top of the Remote display.
Page 52 of 56
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
Ntegra
TP05413021 Interim