Count Results / Reject Reason; Currency Selection - Talaris ntegra 177-0800 User Manual

Operating / Set-up Instructions
3.3.4

Count Results / Reject Reason

Press the RIGHT navigation key to display the "Counting Result". This table
shows the denomination value, the number of each denomination counted, the
value of the denomination and the totals in the count.
Press the RIGHT navigation key a second time to display the "Reject Reasons".
The table lists 14 possible reasons for a note to have been rejected.
If no notes have been counted, only the Reject Reasons will be displayed.
Further presses of the RIGHT navigation key will toggle the display between the
Counting Result and the Reject Reasons.
Press the ESC/CLR key to return to, or place notes on the hopper to revert back
to the normal operational mode.
3.4

Currency Selection

A range of currencies are registered within the Ntegra firmware, but only
currencies that have an active data table loaded in the Ntegra will count
banknotes.
There are two methods of selecting the active currency:
1 Repeatedly press the LEFT navigation key to step through the currencies
registered in the Ntegra firmware.
At each key press the Ntegra will change the currency name and symbol on the
screen to the next currency in the list.
2 Press the CENTRE key to display a list of all registered currencies.
Page 14 of 56
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
Note:
Ntegra
TP05413021 Interim