Related Manuals for Talaris ntegra 177-0800
Summary of Contents for Talaris ntegra 177-0800
- Page 1 Part n o: 1 77-0800 t 177-080 Model: Ntegra Multi Currency 1½pkt Desktop Banknote Counter / Sorter User Guide TP05413021 Interim 26 Aug. 2009 © Talaris Ltd.
- Page 2 THIS PAGE INTENTIONALLY LEFT BLANK...
- Page 3 Neither is any liability assumed for damages resulting from the use of the information contained herein. This document is not part of a contract or license. 26 Aug. 2009 © Talaris Ltd. TP05413021 Interim TP05413021 Interim Page i of vi Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
- Page 4 Thank you for purchasing the new Ntegra, a multi-currency 1.5pkt desktop banknote counter / sorter from Talaris. The 1.5 pocket design features one full stacking pocket and a reject note pocket, plus a range of detection and authentication technologies. Being the product that “bridges the gap” between counting and sorting, Ntegra is packed with features and technology and it is appropriate for a multitude of applications.
- Page 5 Always connect the machine to an earthed mains outlet socket, with the mains cable supplied by Talaris or a direct equivalent. TP05413021 Interim Page iii of vi Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
-
Page 6: Table Of Contents
ADD......................1 - 16 Enter Key....................1 - 16 3.10 Print Key ....................1 - 16 Process Instructions ................. 1 - 17 Piece Count....................1 - 17 Page iv of vi TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) - Page 7 Errors and Error recovery ................ 1 - 53 Integral Printer ..................1 - 55 Installing / Replacing Paper Roll ............... 1 - 55 Paper Specifications ................. 1 - 56 TP05413021 Interim Page v of vi Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
- Page 8 Ntegra THIS PAGE INTENTIONALLY LEFT BLANK TP05413021 Interim Page vi of vi Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
-
Page 9: Introduction
Ensure your hands are not wet when handling the Ntegra. Ensure the Ntegra is only installed where there is proper ventilation and humidity. TP05413021 Interim Page 1 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) - Page 10 If the Ntegra is not working, do not try to fix it yourself The Ntegra contains no User repairable parts. If the Ntegra is not working, or not working properly, please contact your Talaris authorised support organisation. DO NOT attempt to repair or modify the Ntegra.
-
Page 11: Warnings
Counter and seriously damaged. Always check that it is safe to close the Counter. Electrical Shock The indication warns of possible injuries through electrical shocks. TP05413021 Interim Page 3 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 12: Machine Overview
For switching the Ntegra on or off. Optional Integral printer Printer ( Optional ) Colour display Full colour graphical display. Note hopper Notes are placed here for counting. Page 4 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 13: Machine Overview ( Rear View )
Lower cover latch Lift up latch to open the lower cover. Gap adjustment Rotatable note gap adjustment control. Note: The above picture shows additional OPTIONAL interface ports. TP05413021 Interim Page 5 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 14: Display Control Panel ( Keypad )
Enter ( Start/Stop ) Enters data to memory, and Starts/Stops the Ntegra when in Manual mode. Navigation Keys Quick select of currency, count mode, results and denomination. Function navigation. Page 6 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 15: Feed Gap Adjustment
Feed gap adjustment is required for the following reasons: • The counting of new or mint condition notes. • The counting thin or poor condition notes. • The counting of average condition notes. TP05413021 Interim Page 7 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 16: Clearing Note Jams
Open the Ntegra Lower Section and remove any jammed notes, or part notes, from the note path. Ensure that no part-notes are trapped in the note diverter fingers. Page 8 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 17: Cleaning
If there is a build-up of dirt on the TP05413021 Interim Page 9 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) - Page 18 Clean the CIS Sensor with a slightly damp lint-free cloth. You may use a small amount of liquid soap on the cloth. Ensure all soap residue is removed from the rollers. Page 10 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
-
Page 19: Machine Specification
Machine Overview Allow to dry thoroughly before connecting the Ntegra to the AC electrical supply. If large accumulations of dust or dirt are present, contact your local Talaris distributor for further information on how to carry out required operational cleaning. -
Page 20: Operating / Set-Up Instructions
Press the on / off switch to power-up the Ntegra. The Ntegra will power up, briefly show the ‘boot-up’ firmware screen and complete a self test routine while the Talaris logo is being displayed. This will take about 10 seconds. -
Page 21: Currency
When the denomination DD is displayed, the Ntegra will read the value of the first note, and expect all other notes to be of the same value. Anything different, including suspect notes will go to the reject pocket. TP05413021 Interim Page 13 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 22: Count Results / Reject Reason
At each key press the Ntegra will change the currency name and symbol on the screen to the next currency in the list. 2 Press the CENTRE key to display a list of all registered currencies. Page 14 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 23: Mode Selection
Refer to “Functions” on page 39 for full details on the available features. 3.8.2 ESC/CLR Press the ESC/CLR key to exit set-up menus or to clear reject note counts, or note counts in the ADD mode. TP05413021 Interim Page 15 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 24: Batch
When the counted notes have been removed from the stacker. When notes are present in the reject pocket. When notes remain in the input hopper. While a count is in progress. Page 16 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 25: Process Instructions
If AUTO was selected, the Ntegra will re-start automatically. If MANUAL was selected, press the START/STOP key to re- commence the count. TP05413021 Interim Page 17 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 26: Piece Count With Add Function
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra in the MANUAL mode, press the START/STOP key to commence the count. The Ntegra will count the notes, and display the total. Page 18 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) - Page 27 To clear the Grand Total ( with the stacker empty ), or If the notes have been incorrectly removed from the stacker, pressing the PRINT key will bring up the following display: TP05413021 Interim Page 19 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
-
Page 28: Mixed Count
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra in the MANUAL mode, press the START/STOP key to commence the count. Page 20 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) - Page 29 Once the count is complete, and all notes are removed from the pockets, if an Integral or external printer is fitted and enabled, pressing the PRINT key will transmit the count data to the printer. TP05413021 Interim Page 21 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
-
Page 30: Mixed Count With Add Function
Press the ESC/CLR key to return to the value display. Remove the rejected notes from the Reject Pocket. Re-count all acceptable notes. Page 22 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) - Page 31 To clear the Grand Total ( with the stacker empty ), or If the notes have been incorrectly removed from the stacker, pressing the PRINT key will bring up the following display: TP05413021 Interim Page 23 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
-
Page 32: Single Denomination Count
When the denomination DD is displayed, the Ntegra will read the value of the first note, and expect all other notes to be of the same value. Anything different, including suspect notes will go to the reject pocket. Page 24 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) - Page 33 Once the count is complete, and all notes are removed from the pockets, if an Integral or external printer is fitted and enabled, pressing the PRINT key will transmit the count data to the printer. TP05413021 Interim Page 25 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
-
Page 34: Single Count With Add Function
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra in the MANUAL mode, press the START/STOP key to commence the count. Press the PRINT key to transfer the count value to the Grand Total. Page 26 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 35: Note Facing
Using the “UP” navigation key, set the Ntegra in the “Face” mode. Select the denomination to be counted. Press the DOWN navigation key to step through the denomination values specific to the selected currency. TP05413021 Interim Page 27 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) - Page 36 If the stacker is emptied at less than a complete batch, a caution will be shown on the display. Press either the centre navigation key, or the ENTER key to clear the caution message. Page 28 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
-
Page 37: Face With Add Function
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra in the MANUAL mode, press the START/STOP key to commence the count. The Ntegra will count the notes, and display the total. TP05413021 Interim Page 29 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) - Page 38 To clear the Grand Total ( with the stacker empty ), or If the notes have been incorrectly removed from the stacker, pressing the PRINT key will bring up the following display: Page 30 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
-
Page 39: Note Orientation
Anything different, including notes of a different denomination ( both orientations )of the selected currency, and any foreign notes will go to the reject pocket. TP05413021 Interim Page 31 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) - Page 40 Once the count is complete, and all notes are removed from the pockets, if an Integral or external printer is fitted and enabled, pressing the PRINT key will transmit the count data to the printer. Page 32 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
-
Page 41: Orient With Add Function
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra in the MANUAL mode, press the START/STOP key to commence the count. Press the PRINT key to transfer the count value to the Grand Total. TP05413021 Interim Page 33 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 42: Fitness Sorting
If required, press the BATCH key to enable the batch limit in quantity of notes. If it is required to batch by value, press the BATCH key again. If a batch quantity, or Page 34 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) - Page 43 If the stacker is emptied at less than a complete batch, a caution will be shown on the display. Press either the centre navigation key, or the ENTER key to clear the caution message. TP05413021 Interim Page 35 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
-
Page 44: Fitness With Add Function
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra in the MANUAL mode, press the START/STOP key to commence the count. The Ntegra will count the notes, and display the total. Page 36 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) - Page 45 To clear the Grand Total ( with the stacker empty ), or If the notes have been incorrectly removed from the stacker, pressing the PRINT key will bring up the following display: TP05413021 Interim Page 37 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
- Page 46 Press the 2 key on the numeric keys will immediately clear the Grand Total. Press the 3 key on the numeric keys to return to the count display. Page 38 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
-
Page 47: Functions
This feature allows the User to set the ‘real time’ date and time according to their location. To enter the Date & Time feature, press the 1 key on the numeric keys. TP05413021 Interim Page 39 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 48: Printer
Option 8 ( Default ) will force the external printer communication parameters to 9600 baud / 8 data bits / 1 stop bit / no parity. Page 40 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 49: Sound
Play Sound This feature is used to play/test the individual system sounds. To enter the Play Sound feature, press the 2 key on the numeric keys. TP05413021 Interim Page 41 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 50: Density Level
ID Setting This feature allows the Ntegra to given a unique numeric identification ( ID ) number, up to six ( 6 ) characters in length. Page 42 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 51: End Of Day
A totals table is available for all registered currencies. Note: There may be more currencies registered in the firmware than active counting currencies loaded in the Ntegra. TP05413021 Interim Page 43 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 52: Language
To enter the Language feature, press the 7 key on the numeric keys. Press the key on the numeric keys appropriate to the required language. Page 44 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 53: Start Mode
Ntegra activity, either counting or a key press, to the screen saver image being displayed. Note: Contact your local Talaris distributor for further information on creating and installing a ‘user’ image. TP05413021 Interim Page 45 of 56 Copyright ©... -
Page 54: Information
This feature displays the Ntegra ID number ( if set ), firmware loaded, and the note count. To enter the Information feature, press the 2 key on the numeric keys. Page 46 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 55: Ntegra Options
Press the ESC/CLR key to return to the value display. Remove the rejected notes from the Reject Pocket. Re-count all acceptable notes. TP05413021 Interim Page 47 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) - Page 56 To clear the Grand Total ( with the stacker empty ), or If the notes have been incorrectly removed from the stacker, pressing the PRINT key will bring up the following display: Page 48 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
-
Page 57: Tito" Program
Sample Bar Code Ticket In the bar code READ mode, the bar code tickets MUST be placed in the input hopper bar code side DOWN. TP05413021 Interim Page 49 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) - Page 58 Ntegra will start as soon as tickets are placed on the input hopper. With the Ntegra in the MANUAL mode, press the START/STOP key to commence the count. Page 50 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
-
Page 59: Remote Display
Ntegra. Remote Display Dimensions: Width 106mm Depth 37mm Height 70mm Weight 129.5g The Remote Display is powered directly from the Ntegra via the RS232 interface cable. TP05413021 Interim Page 51 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 60: Connecting The Remote Display
The data shown on the Remote display can be cleared ( blanked ) by pressing the Clear button on the top of the Remote display. Page 52 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) -
Page 61: Errors And Error Recovery
Upper Clear Upper Clear Low Clear Lower Clear Miss-Feeding Miss-Feeding Jam 0_1 Jam sensor Jam occurred Jam 1 Jam 1-2 Jam 2 Jam 2-3 Jam 3 TP05413021 Interim Page 53 of 56 Copyright © 2009 by Talaris Ltd., Basingstoke (UK) - Page 62 The Ntegra recovers when jammed notes are removed Jam2-3 The Ntegra recovers when jammed notes are removed Jam-3 The Ntegra recovers when jammed notes are removed Page 54 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
-
Page 63: 1 Integral Printer
An Integral printer is available in specific models of the Ntegra 1½pkt Desktop Banknote Counter / Sorter. The printer is installed in the lower left cover. Contact your authorised local Talaris distributor for details. Installing / Replacing Paper Roll 1 Squeeze in the two ( 2 ) catches, and pull the printer cover open. -
Page 64: Paper Specifications
Integral Printer Ntegra Paper Specifications Type: Thermal sensitive paper Roll Width: 57mm Roll Diameter: 60mm Paper Thickness: 0.01mm Printing Side: External Page 56 of 56 TP05413021 Interim Copyright © 2009 by Talaris Ltd., Basingstoke (UK) - Page 65 THIS PAGE INTENTIONALLY LEFT BLANK...