Orient With Add Function - Talaris ntegra 177-0800 User Manual

Ntegra
Any notes rejected are not included in the count. The number of notes rejected is
shown on the display. Press the RIGHT navigation key to see the reason the
notes were rejected.
4.5.1

Orient with ADD Function

Select the ADD function.
Place the notes to be counted on the input hopper. In the AUTO mode, the
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra
in the MANUAL mode, press the START/STOP key to commence the count.
The Ntegra will count the notes, and display the total.
If notes were rejected, these notes are not included in the count value. The
number of notes rejected is shown on the display. Press the RIGHT navigation
key to see the reason the notes were rejected.
Press the ESC/CLR key to return to the value display.
Remove the rejected notes from the Reject Pocket. Re-count all acceptable
notes.
Before removing the counted notes from the stacker, press the PRINT key to
transfer the count value to the Grand Total, and if an Integral or external printer is
fitted and enabled, transmit the last count value to the printer.
Place the next notes to be counted on the input hopper. In the AUTO mode, the
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra
in the MANUAL mode, press the START/STOP key to commence the count.
Press the PRINT key to transfer the count value to the Grand Total.
TP05413021 Interim
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
Process Instructions
Page 33 of 56