Density Level; Id Setting - Talaris ntegra 177-0800 User Manual

Functions
A sub-menu will be displayed.
Press the key on the numeric keys appropriate to the system sound to be played.
All other keys, if pressed, will initiate the 'Click' system sound.
5.1.4

Density Level

This feature is used to set the density level for the detection of 'double' notes.
In 'Mixed' count mode, the acceptance of certain darker coloured note may
be affected by the density level setting.
To enter the Density feature, press the 4 key on the numeric keys.
Press the RIGHT navigation key to lower the density level at which a note will be
determined to be a double.
Press the LEFT navigation key to raise the density level at which a note will be
determined to be a double.
5.1.5

ID Setting

This feature allows the Ntegra to given a unique numeric identification ( ID )
number, up to six ( 6 ) characters in length.
Page 42 of 56
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
Note:
Note:
Ntegra
TP05413021 Interim