Talaris 177-0600 User Manual
  1. Manuals
  2. Brands
  3. Talaris Manuals
  4. Banknote Counter
  5. 177-0600
  6. User manual

Talaris 177-0600 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Part n o: 1 77-0600 t 177-0604
o
Model EV8650
Currency Counter
User Guide
TP05413002 Rev. 03
28 Jan. 2009 Copyright © Talaris Ltd.

Advertisement

Table of Contents
loading

Related Manuals for Talaris 177-0600

Summary of Contents for Talaris 177-0600

  • Page 1 Part n o: 1 77-0600 t 177-0604 Model EV8650 Currency Counter User Guide TP05413002 Rev. 03 28 Jan. 2009 Copyright © Talaris Ltd.
  • Page 2 THIS PAGE INTENTIONALLY LEFT BLANK...
  • Page 3 This document is not part of a contract or license. 28 Jan. 2009 © Talaris Ltd. TP05413002 Rev. 03 TP05413002 Rev. 03 Page i of vi Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
  • Page 4 Dear Valued Customer, Thank you for purchasing the new EV86-Series note counter from Talaris. Given Talaris’s long industry experience, we understand what people require from a bank note counter. From the first note to the last, the EV86-Series has market leading •...
  • Page 5 If the sensors are obscured the feed rollers will operate. Always keep loose clothing and hair out of the feed hopper area when operating the machine. TP05413002 Rev. 03 Page iii of vi Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
  • Page 6 Model: EV8650 THIS PAGE INTENTIONALLY LEFT BLANK Page iv of vi TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 7: Table Of Contents

    (Detector Settings) ..........41 TP05413002 Rev. 03 Page v of vi Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
  • Page 8 Display Messages ..........60 Page vi of vi TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 9: Introduction

    DANGER TO HANDS: The indication warns of possible injuries to the hands. ELECTRIC SHOCKS: The indication warns of possible injuries through electrical shocks. TP05413002 Rev. 03 Page 1 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 10: General Notes Concerning Safety

    • Electrical work shall be performed only by qualified personnel. Remember, to take extra care when covers have been removed or circuit boards unplugged. • Never leave a part-serviced machine connected when unattended. Page 2 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 11: Machine Overview

    Controls operator functions. Note Stacker Sensor. For detecting counted notes. Note Stacker. Counted notes are collected here. Numeric Keypad. Use for entering data into the machine. TP05413002 Rev. 03 Page 3 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 12: Machine Overview (Rear View)

    RS232 Port Channel 1. For connection to a computer or printer. RS232 Port Channel 2. For connection to a printer - SMDS and 3D/IR/UV only. Page 4 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 13: Display Control Panel (Keypad)

    FdEn Modes, currency selection and exit key. Left Arrow Key. For scrolling through various mode options. Numeric Keypad. For note count / value and other functions. TP05413002 Rev. 03 Page 5 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 14: Display Control Panel (Display Symbols)

    Detection / SMDS Detection is on. (Only available on selected versions). UV / PPD. Visible if the Ultra Violet / Paper Property Detector is on. (Only available on selected versions). Page 6 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 15: Feed Gap Adjustment

    Now move the feedgap adjuster wheel upwards 3 clicks. Old notes may require a larger feed gap. New notes may require a smaller feed gap. TP05413002 Rev. 03 Page 7 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 16: Note Path Access And Note Guides

    They should be adjusted for different notes sizes. Optimum performance will be achieved by having the note guides correctly set for the currency being fed. Page 8 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 17: Maintenance

    You may also clean the Mechanical Double Detect rollers in the same way. Contact your local Talaris distributor for further information on how to carry out required operational cleaning. TP05413002 Rev. 03 Page 9 of 62 Copyright ©...

  • Page 18: Machine Specification

    Larger note sizes may be processed but optimum performance may not be achieved. Speed 800 to 2000 + notes per minute. Hopper capacity 500 notes Stacker capacity 50 - 200 notes Page 10 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 19: Factory Default Settings

    50; 25; 20;10; 5; 3; 2; 1 Available Currency tables as standard USd (United States Dollars) 100; 50; 20; 10; 5; 2;1 Eur (Euros) 500; 200; 100; 50; 20; 10; 5 TP05413002 Rev. 03 Page 11 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 20: Operating Instructions

    The display will then automatically select a batch size of 100 notes and the auto start will be activated. Note: If the Display Shows FAULT check the Detector Box is closed correctly. Page 12 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 21: Speed Adjustment

    The machine will automatically reduce the speed to SPEEd 4; this is done to enhance detector performance: PPd (PPd), IR / FoiL (IR / FoiL), LonG Edge (LonG), SMDS (SnDS), EPrES (EPrES) TP05413002 Rev. 03 Page 13 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 22: Batch Settings

    The next batch will be started automatically if there are notes in the feed hopper and AUTO is selected. If AUTO is not selected, press START/STOP to clear the error message and press START/STOP again to continue the count. Page 14 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 23: Machine Totals

    Other lower level totals may also be cleared depending on the mode of operation: TP05413002 Rev. 03 Page 15 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
  • Page 24 Notes should be removed in the normal way before entering the Total functions or any other operator modes. Page 16 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 25: Mode Selection (Count Or Value)

    AdEn (Automatic Denomination) For counting documents, all of the same denomination as the first fed and displaying the result as a value. TP05413002 Rev. 03 Page 17 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
  • Page 26 (3D, SMDS and SD machines only.) DISP (Dispense) For counting a number of notes of a single denomination to provide a previously specified total value. Page 18 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 27: Currency Selection

    If the user wishes to count without using the pre-defined currency settings then selecting oFF will revert to standard detectors and manual detector listings. Repeat the above procedure until the display shows oFF. TP05413002 Rev. 03 Page 19 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 28: Count Mode

    If AUTO is selected, press START/STOP to clear the error message, and the machine will restart automatically. If AUTO is not selected, press START/STOP to clear the error message and press START/STOP again to continue the count. Page 20 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 29: Value Count Mode

    (3D, SMDS and E11+ machines only.) DISP (Dispense) For counting a number of notes of a single denomination to provide a previously specified total value. TP05413002 Rev. 03 Page 21 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 30: Value Count Mode Without Size (Dentr And Fden Modes)

    By default 1; 2; 5; 10; 20; 50; 100; 200; 500 Note: If a note of a different denomination is hidden in a bundle it will be valued as the denomination selected. Page 22 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 31: Value Count Mode With Size & Smds (Aden, Fden And Specl)

    Note: When using an SMDS machine. The machine will automatically use the SMDS detector when in the above value modes, it cannot be switched off using the DET key. TP05413002 Rev. 03 Page 23 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 32: Auto Denomination - Aden

    Place notes to be value counted in the hopper. The machine will start automatically if AUTO START has been selected, or Press the START/STOP key if it has not. Page 24 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 33: Fixed Denomination - Fden

    Place notes to be value counted in the hopper. The machine will start automatically if AUTO START has been selected, or Press the START/STOP key if it has not. TP05413002 Rev. 03 Page 25 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 34: Mixed Denomination - Specl

    Place notes to be value counted in the hopper. The machine will start automatically if AUTO START has been selected, or press the START/STOP key if it has not. Page 26 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 35: Value Dispense Mode

    Press START/STOP to return to the counting display or wait for the display to time out. The machine will only dispense in AdEn if a valid currency table is loaded. TP05413002 Rev. 03 Page 27 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 36: Value Dispense Mode, Auto Denomination - Aden

    The size of each subsequent note is checked against the denomination table held within the machine. If the dispense amount has been completed successfully, the display will show donE. Page 28 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 37: Detector Control

    The machine will automatically reduce the speed to SPEEd 4. This is done to enhance detector performance. PPd (PPd), IR / FoiL (IR / FoiL), LonG Edge (LonG), SMDS (SnDS), MAgI (MAgI) TP05413002 Rev. 03 Page 29 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 38: Detector Display Messages

    Press START/STOP to continue the count or remove all the notes from the stacker and re-feed again. Fig 1 Short Edge Size Icon Page 30 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 39: Counterfeit Detection Aid Errors - Cf

    Press START/STOP to continue the count or remove all the notes from the stacker and re-feed again. Fig 1 MG and UV Suspect Icon TP05413002 Rev. 03 Page 31 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 40: Print Commands

    Supervisor Function (Print SEL) prior to use. * (Citizen CBM-910 Model, contact your local Talaris Office for further information.) To enter the print on demand options. Press and hold the TOTAL Key for one second.

  • Page 41: Cns Control Command (Cash Management System)

    PC automatically at power-up or wait until commanded to go On Line. Two other protocols are also available. 2650 Pro (default) and 8643 Pro. For help with the CMS connection, contact your local Talaris Office. TP05413002 Rev. 03 Page 33 of 62...

  • Page 42: Error Codes Display

    Press START/STOP to clear the error. Descriptions of the Display Messages can be found on page 60 in this User Guide. For a full Error Code list, please contact your local Talaris Office. Page 34 of 62 TP05413002 Rev. 03...

  • Page 43: Keypad Function Summary

    Manual Print Clear Clear Displayed Value Batch Select Batch Select Detector Menu Speed Select Speed Auto Select Auto Start Legacy CMS Control Scroll through options TP05413002 Rev. 03 Page 35 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 44: Supervisor Functions

    To exit the Supervisor Functions completely, press the DENOM Key. You will be asked if you want to save the settings. Press the DENOM key to exit without saving or press the START/STOP key to save the settings. Page 36 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 45: Supervisor Functions Summary

    Note: Even if PIN off has been selected, you will still require the PIN to enter this function. If you forget the new PIN number a Talaris Representative will have to reset the machine back to the original Default PIN of TP05413002 Rev.
  • Page 46 1. rESt CG - Which will reset the machine to the last saved configuration. 2. dEFLt CFG - Which will restore the machine back to ‘factory’ defaults. Press the START/STOP key to accept. Page 38 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 47: Count Sel (Count Quick Access Modes)

    To exit the Supervisor Functions completely, press the DENOM Key. You will now be asked if you want to save the settings. Press the DENOM key to exit without saving. Press the START/STOP key to save settings. TP05413002 Rev. 03 Page 39 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 48: Value Sel (Value Quick Access Modes)

    To exit the Supervisor Functions completely, press the DENOM Key. You will now be asked if you want to save the settings. Press the DENOM key to exit without saving. Press the START/STOP key to save settings. Page 40 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 49: Det (Detector Settings)

    Sensitivity settings 8 - 9 should only be selected when poor quality notes are giving a higher than expected stop rate. To exit the dEt option press the DENOM key. TP05413002 Rev. 03 Page 41 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
  • Page 50 To exit the Supervisor Functions completely, press the DENOM Key. You will now be asked if you want to save the settings. Press the DENOM key to exit without saving. Press the START/STOP key to save settings. Page 42 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 51: Print Sel (Automatic Print Function)

    It can be re-set to zero in the Printer set-up mode. (Not used in dEntr or Value dispense modes). TP05413002 Rev. 03 Page 43 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 52: Print Sel (Printer Set-Up Mode)

    The guillotine would then cut each printout separately. The Hex code characters for that type of printer (with a Page 44 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
  • Page 53 To exit the Supervisor Functions completely, press the DENOM Key. You will now be asked if you want to save the settings. Press the DENOM key to exit without saving. Press the START/STOP key to save settings. TP05413002 Rev. 03 Page 45 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 54: Auto (Auto-Start Delay)

    To exit the Supervisor Functions completely, press the DENOM Key. You will be asked if you want to save the settings. Press the DENOM key to exit without saving. Press the START/STOP key to save settings. Page 46 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 55: Stac (Change Stacker Limit)

    To exit the Supervisor Functions completely, press the DENOM Key. You will be asked if you want to save the settings. Press the DENOM key to exit without saving. Press the START/STOP key to save settings. TP05413002 Rev. 03 Page 47 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 56: Den (Select Denomination Values)

    To exit the Supervisor Functions completely, press the DENOM Key. You will be asked if you want to save the settings. Press the DENOM key to exit without saving. Press the START/STOP key to save settings. Page 48 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 57: Secur (Security Functions)

    To exit this function and the Supervisor Functions completely, press the DENOM Key. You will be asked if you want to save the settings. Press the DENOM key to exit without saving. TP05413002 Rev. 03 Page 49 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
  • Page 58 Supervisor Functions Model: EV8650 Press the START/STOP key to save settings. Note: If you forget your PIN, you will have to contact a Talaris Office in your region to reset the machine back to it’s default PIN. Page 50 of 62 TP05413002 Rev.

  • Page 59: Cns (Rs232 Cash Management System)

    You will be asked if you want to save the settings. Press the DENOM key to exit without saving. Press the START/STOP key to save. TP05413002 Rev. 03 Page 51 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
  • Page 60 PAr 9600 19200 38400 After changing the communication protocols you must turn the EV8650 off and on again for any changes to take affect. Page 52 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 61: Restr (Restore Information)

    This mode overrides the normal default power-up configuration in memory. TP05413002 Rev. 03 Page 53 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
  • Page 62 To exit the Supervisor Functions completely, press the DENOM Key. You will be asked if you want to save the settings. Press the DENOM key to exit without saving. Press the START/STOP key to save settings. Page 54 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 63: Beep (Setting The Beeper)

    Key. You will be asked if you want to save the settings. Press the DENOM key to exit without saving. Press the START/STOP key to save settings. TP05413002 Rev. 03 Page 55 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 64: Rdisp (Remote Display Settings)

    Key. You will be asked if you want to save the settings. Press the DENOM key to exit without saving. Press the START/STOP key to save settings. Page 56 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 65: Curr (To Enable Or Disable Currency Tables)

    Key. You will be asked if you want to save the settings. Press the DENOM key to exit without saving. Press the START/STOP key to save settings. TP05413002 Rev. 03 Page 57 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 66: Optional Remote Display

    CLEAR key or start a new transaction. If you do not want this option, you can set the remote display to go blank after a selected time period. It is also possible to configure the remote display to show error messages. Page 58 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 67: Displaying Large Values

    For example: If a total value of 212,500,000 was being displayed The display will switch between “212- -” & “- -500000”. TP05413002 Rev. 03 Page 59 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

  • Page 68: Display Messages

    A note of a different size has been Examine the notes, replace note or detected. re-feed. A Counterfeit Suspect note has Examine the note replace note or been detected. re-feed. Page 60 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
  • Page 69 The icon for the affected Remove all the notes and repeat detector will flash. the count. Clean Detector This may be too dirt in the transport path. TP05413002 Rev. 03 Page 61 of 62 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
  • Page 70 Model: EV8650 THIS PAGE INTENTIONALLY LEFT BLANK Page 62 of 62 TP05413002 Rev. 03 Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
  • Page 71 THIS PAGE INTENTIONALLY LEFT BLANK...
  • Page 72 Neither is any liability assumed for damages resulting from the use of the information contained herein. This document is not part of a contract or licence save insofar as may be expressly agreed. All capacities and throughput figures are subject to note size, note quality and process used. Talaris is a trademark of Talaris Holdings Limited. © Talaris Limited 2009.

This manual is also suitable for:

Ev8650177-0604

Table of Contents