Download Print this page

Maytag CGR1425ADT User's guide Manual page 27

Advertisement

Available languages

Available languages

PROBLEM
$OLUTmON
Oven did not self-clean
properly
° Longer cHeaningtime may be needed.
(select models).
, Excessive spiHovers, especially sugary' and/or acidic foods, were not removed prior
to the stir-dean cycle.
Oven door will not unmock
after self-clean
cycle
(select
models)
Moisture
collects
on oven
window
or steam
comes
from
oven vent.
There is a strong odor or light
smoke when oven is turned on.
FaamtCodes
(select models)
Noises may be heard.
There are no beeps and
"SAb"
flashing
and then
Oven interior is still hot. AHow about one hour for the oven to cooHafter the
compHetion of a stir-dean cycle. The door can be opened when "LOCK" is not
displayed.
The control and door may be locked. See pages 11 and 20 to unlock.
, This is normal when cooking foods high in moisture.
, Excessive moisture was used when cleaning the window.
, This is normal for a new range and wi[[ disappear after a few uses. Initiating a dean
cycle will "burn off" the odors more quickly.
° Turning on a ventilation fan will help remove the smoke and/or odor.
° Excessive food soils on the oven bottom. Use a self-clean cycle.
° BAKE or LOCK may flash rapidly in the display to alert you if there is an error
or a problem. If BAKE or LOCK appear in the display, press the Cancel pad.
If BAKE or LOCK continue to flash, disconnect power to the appliance.
Wait a few minutes, and then reconnect power. If the flashing still continues,
disconnect power to the appliance and call an authorized servicer.
° If the oven is heavily soiled, excessive flareups may result in a fault code during
cleaning. Press the CANCEL pad and allow the oven to cool completely, wipe out
excess soil, then reset the clean cycle. If the fault code reappears, contact an
authorized servicer.
, The oven makes several low level noises. You may hear the oven relays as they go on
and off. This is normal.
, As the oven heats and cools, you may hear sounds of metal parts expanding and
contracting. This is normal and will not damage your appliance.
° Control may be in Sabbath Mode. See page 15.
° Oven is in Sabbath Mode. To cancel, press and hold the Clock pad for five
seconds.
26

Advertisement

loading