Integrated Peripherals - ECS GeForce 6100PM-M2 Manual

Integrated Peripherals

These options display items that define the operation of peripheral components
on the system's input/output ports.
Phoenix-Award WorkstationBIOS CMOS Setup Utility
IDE Function Setup
RAID Config
Onboard Device
Super IO Device
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
IDE Function Setup (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Phoenix-Award WorkstationBIOS CMOS Setup Utility
OnChip IDE Channel 0
Primary Master PIO
Primary Slave PIO
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
IDE DMA transfer access
Serial-ATA Controller
IDE Prefetch Mode
IDE HDD Block Mode
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
On-Chip IDE Channel 0 (Enabled)
Use these items to enable or disable the PCI IDE channels that are integrated on the
motherboard.
Primary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave device. These four items let
you assign the kind of PIO (Programmed Input/Output) was used by the IDE devices.
Choose Auto to let the system auto detect which PIO mode is best, or select a PIO
mode from 0-4.
Integrated Peripherals
[Press Enter]
[Press Enter]
Menu Level
[Press Enter]
[Press Enter]
F6: Fail-Safe Defaults F7:Optimized Defaults
IDE Function Setup
[Enabled]
Item Help
[Auto]
[Auto]
Menu Level
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[All Enabled]
[Enabled]
[Enabled]
F6: Fail-Safe Defaults F7:Optimized Defaults
Using BIOS
Item Help
39