Connecting I/O Devices - ECS GF7100PVT-M3 Manual

Connecting I/O Devices

The backplane of the motherboard has the following I/O ports:
PS2 Mouse Use the upper PS/2 port to connect a PS/2 pointing device.
PS2 Keyboard
Use the lower PS/2 port to connect a PS/2 keyboard.
DVI Port
Use the DVI port to connect the monitor.
(optional)
Serial Port Use the COM port to connect serial devices such as mice or
fax/modems.
(COM)
VGA Port Connect your monitor to the VGA port.
LAN Port
Connect an RJ-45 jack to the LAN port to connect your
computer to the Network.
USB Ports Use the USB ports to connect USB devices.
Audio Ports
Use the audio jacks to connect audio devices. The D port is
for stereo line-in signal, while the F port is for microphone
in signal. This mainboard supports 8-channel audio devices
that correspond to the A, B, C and E port respectively. In
addition, all of the 3 ports, B, C and E provide users with
both right & left channels individually. Users please refer to
the following note for specific port function definition.
A : Center & Woofer
B : Back Surround
C : Side Surround
The above port definition can be changed to audio input or
audio output by changing the driver utility setting.
Installing the Motherboard
D : Line-in
E : Front Out
F : Mic_in Rear
21