Mb Intelligent Bios Iii) Menu - ECS A960M-M3 Manual

M.I.B III (MB Intelligent BIOS III) Menu
This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have
installed in your system.
Main Advanced Chipset
M.I.B III (MB Intelligent BIOS III)
Processor Power Planes and Voltage Controls
Memory Control
HT Control
Auto Detect DIMM/PCI Clk
Clockgen Spread Spectrum
CPU/HT Reference Clock (MHz)
VDIMM Voltage
Processor Power Planes and Voltage Controls
Scroll to this item and press <Enter> to view the following screen.
Main Advanced Chipset
Processor Power Planes and Voltage Controls
Current CPU Speed:
Core Clock multiplier
AltVidC3 Enable
Slam Time Mode
VSSlamTime
Current CPU Speed: 3600MHz
This item shows current CPU speed.
Core Clock multiplier (Auto)
Use this item to set the core clock multiplier.
AltVidC3 Enable (Auto)
This item allows users to select amdAltVidEn 0.24N:3x80[12]
Slam Time Mode (Auto)
This item allows users to set slam time mode, this option is only for RB-C3, BL-C3, DA-
C3.
VSSlam Time (Auto)
This item specifies the time to wait for voltage stabilization during altvid transitions
if a new VID is provided to the voltage regulator without ramping. 0:24N:3xDC [31:29]
42
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
M.I.B.III Boot
[Enabled]
[Enabled]
200
[1.6V]
Version 2.14.1219.2.14.1219. Copyright (C) 2011 American
Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
M.I.B.III Boot
3600MHz
[Auto]
[Auto]
[Auto]
[Auto]
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
A960M-M3 USER MANUAL
Security Exit
Processor Power Planes and
Voltage Controls
: Select Screen
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Security Exit
Core Clock multiplier
: Select Screen
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit