Super Io Configuration - ECS A960M-M3 Manual

Super IO Configuration

Use this item to show the information of Super IO configuration.
Main Advanced
Super IO Configuration
Super IO Chip
Serial Port 0 Configuration
Parallel Port Configuration
Serial Port 0 Configuration
Scroll to this item and press <Enter> to view the following screen:
Main Advanced
Serial Port 0 Configuration
Serial Port
Device Settings
Change Settings
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=3F8h; IRQ=4)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Press <Esc> to return to the Super IO Configuration page.
38
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Chipset M.I.B.III Boot
F71869
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Chipset M.I.B.III Boot
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
A960M-M3 USER MANUAL
Security Exit
Set Parameters of Serial Port
0 (COMA)
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Security Exit
Enable or Disable Serial Port
(COM)
[Enabled]
IO=3F8h; IRQ=4;
/Click: Select Item
[Auto]
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
: Select Screen
: Select Screen