Vehicle Remote Malfunction Diagnosis - Mercedes-Benz 2013 C-Class Coupe Operator's Manual

Hide thumbs Also See for 2013 C-Class Coupe:
Table of Contents

Advertisement

USA only: alternatively, the vehicle can be
locked via:
the Internet, under the "Owners Online"
R
section
the telephone application (e.g. iPhone
R
Blackberry)
To do this, you will need your identification
number and password.
i
The vehicle remote closing feature is
available when the relevant mobile phone
network is available and data connection is
possible.
Stolen vehicle recovery service
If your vehicle has been stolen:
Notify the police.
X
The police will issue a numbered incident
report.
This number will be forwarded to the
X
Mercedes-Benz Customer Assistance
Center together with your PIN.
The Mercedes-Benz Customer Assistance
Center then attempts to locate the mbrace
system. The Mercedes-Benz Customer
Assistance Center contacts you and the
local law enforcement agency if the vehicle
is located. However, only the law
enforcement agency is informed of the
location of the vehicle.
i
If the anti-theft alarm system is activated
for longer than 30 seconds, the Mercedes-
Benz Customer Assistance center is
automatically informed.

Vehicle remote malfunction diagnosis

With the vehicle remote malfunction
diagnosis (Vehicle Health Check), the
Customer Assistance center can provide
improved support for problems with your
vehicle. During an existing call, vehicle data
is transferred to the Customer Assistance
center. The customer service representative
can use the received data to decide what kind
of assistance is required. You are then, for
example, guided to the nearest Mercedes-
Benz Service center or a recovery vehicle is
called.
If vehicle data needs to be transferred during
an MB Info call or a Roadside Assistance call,
®
,
this is initiated by the Customer Assistance
center. You will see the
Assistance Connected
COMAND display. If the vehicle remote
malfunction diagnosis is able to be started,
the
Request for vehicle diagnosis
received. Start vehicle diagnosis?
message appears in the display.
Press
Yes
to confirm the message.
X
If the
Vehicle Diagnosis: Please
X
switch on ignition.
turn the key to position 2 in the ignition
lock.
If the
Please follow the
X
instructions received by phone and
move your vehicle to a safe
position.
message appears: follow the
instructions of the customer service
representative.
The message in the display disappears.
If you select Cancel, the vehicle remote
malfunction diagnosis is canceled
completely.
The vehicle operating state check begins.
Meanwhile, the
activated
message appears.
When the check is finished, the
vehicle diagnosis data...(Voice
connection may be interrupted
during data transfer.)
appears. The vehicle data can now be sent to
the Customer Assistance center.
Press
OK
to confirm the message.
X
The voice connection with the Customer
Assistance center is terminated.
The
Vehicle Diagnosis:
Transferring data...
The vehicle data is sent to the Customer
Assistance center.
Features
Roadside
message in the
message appears:
Vehicle diagnosis
Sending
message
appears.
263
Z

Advertisement

Table of Contents
loading

Table of Contents