Defrosting The Windows - Mercedes-Benz 2013 C-Class Coupe Operator's Manual

Switching the ZONE function on/off
This function is only available in vehicles for
Canada.
To activate: press the á button.
X
The indicator lamp in the á button lights
up.
The temperature setting for the driver's
side is not adopted for the front-passenger
side.
When the buttons for temperature, airflow or
air distribution are activated, the temperature
setting for the driver's side is not adopted for
the other climate control zones.
To deactivate: press the á button.
X
The indicator lamp in the á button goes
out.
The temperature setting for the driver's
side is adopted for the front-passenger
side.
Defrosting the windshield
You can use this function to defrost the
windshield or to defrost the inside of the
windshield and the side windows.
i
You should only select the "windshield
defrosting" function until the windshield is
clear again.
Turn the SmartKey to position 2 in the
X
ignition lock ( page 133).
Y
To activate: press the ¬ button.
X
The indicator lamp in the ¬ button lights
up.
The climate control system switches to the
following functions:
high airflow
R
high temperature
R
air distribution to the windshield and
R
front side windows
air-recirculation mode off
R
If the battery is not sufficiently charged,
blower output may be reduced. As soon as
Operating the climate control systems
the battery is sufficiently charged, full blower
output will be available.
To deactivate: press the ¬ button.
X
The indicator lamp in the ¬ button goes
out. The previously selected settings are
restored. Air-recirculation mode remains
deactivated.
or
Press the à button.
X
The indicator lamp in the ¬ button goes
out. Airflow and air distribution are set to
automatic mode.
or
Turn temperature control : or B
X
clockwise or counter-clockwise
( page 123).
Y
or
Press the K or I button.
X
MAX COOL maximum cooling
The MAX COOL function is only available in
vehicles for the USA.
MAX COOL is only operational when the
engine is running.
When you activate MAX COOL, climate
control switches to the following functions:
maximum cooling
R
maximum airflow
R
air-recirculation mode on
R
To activate: press the Ù button.
X
The indicator lamp in the button lights up.
To activate: press the Ù button again.
X
The indicator lamp goes out. The previously
selected settings are restored.

Defrosting the windows

Windows fogged up on the inside
Activate the ¿ cooling with air
X
dehumidification function.
Activate automatic mode Ã.
X
127