Opening And Closing - Mercedes-Benz 2013 C-Class Coupe Operator's Manual

Side windows
84
during resetting
R
when closing the side window again
R
manually immediately after automatic
reversing
This means that the reversing feature cannot
prevent someone being trapped in these
situations. There is a risk of injury.
Make sure that no body parts are in close
proximity during the closing procedure. If
someone becomes trapped, press the switch
to open the side window again.
Opening and closing the side
windows
Left
:
Right
;
The switches for all side windows are located
on the driver's door. There is also a switch for
the front-passenger side window on the front-
passenger door.
The switches on the driver's door take
precedence.
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
To open: press the corresponding switch.
X
To close: pull the corresponding switch.
X
i
If you press the switch beyond the point
of resistance, an automatic opening/
closing process is started in the
corresponding direction. You can stop
automatic operation by operating the
switch again.
i
You can continue to operate the side
windows after you switch off the engine or
remove the SmartKey. This function is
available for up to five minutes or until the
driver's or front-passenger door is opened.
Convenience opening
You can ventilate the vehicle before you start
driving. To do this, the SmartKey is used to
carry out the following functions
simultaneously:
unlock the vehicle
R
open the side windows
R
open the panorama roof with power tilt/
R
sliding panel and the roller sunblind
switch on the seat ventilation for the
R
driver's seat
i
The convenience opening feature can
only be operated using the SmartKey. The
SmartKey must be close to the driver's
door handle.
Point the tip of the SmartKey at the driver's
X
door handle.
Press and hold the % button until the
X
side windows and the panorama roof with
power tilt/sliding panel are in the desired
position.
If the roller sunblind of the panorama roof
with power tilt/sliding panel is closed, the
roller sunblind is opened first.
Press and hold the % button again until
X
the panorama roof with power tilt/sliding
panel is in the desired position.
To interrupt convenience opening:
X
release the % button.