Commercial User Setup - Exmark Phazer Operator's Manual

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983

1.9 COMMERCIAL USER SETUP

1.9.1 On the 34" deck, three of the four 5/16-18 x 3/4 hex capscrews that secure the belt
POTENTIAL HAZARD
♦ Hydraulic fluid escaping under pressure
can penetrate skin and cause injury.
WHAT CAN HAPPEN
♦ Fluid accidentally injected into the skin
must be surgically removed within a few
hours by a doctor familiar with this form of
injury or gangrene may result.
HOW TO AVOID THE HAZARD
♦ Make sure all hydraulic fluid hoses and
lines are in good condition an all hydraulic
connections and fittings are tight before
applying pressure to hydraulic system.
♦ Keep body and hands away from pinhole
leaks or nozzles that eject high pressure
hydraulic fluid.
♦ Use cardboard or paper, not your hands,
to find hydraulic leaks.
♦ Safely relieve all pressure in the hydraulic
system by placing the motion control
levers in neutral and shutting off the
engine before performing any work on the
hydraulic system.
shields to the mower deck can be replaced with the knobs (Figure 2A).
On the 44" deck replace the four capscrews with the knobs (Figure 2B).
34" DECK
FIGURE 2A
www.mymowerparts.com
WARNING
10
44" DECK
FIGURE 2B