Accessories And Tools Needed; Accessories; Tools - Maytag HRX40HARS User Manual

Accessories

To simplify the installation Maytag has available the installation parts shown below. You may or may not need all of these accessories
depending on your type of installation. Call a Maytag Service Specialist at 1-800-365-0024 for an authorized installer.
EXPANSION TANKS FOR THERMAL EXPANSION CONDITIONS
AVAILABLE IN 2 GALLON (7.6 LITERS), Part No. 9850048 AND
5 GALLON (18.9 LITERS), Part No. 9850049 CAPACITY.

Tools

You may or may not need all these tools, depending on your
type of installation. These tools can be purchased at your local
hardware store.
• Pipe Wrenches (2) 14" (356 mm)
• Screwdriver
• Tin Snips
• 6' (1.82 m) Tape or Folding Ruler
• Garden Hose
• Drill
• Pipe Dope or Teflon Tape
SLOT-HEAD SCREWDRIVER
PHILLIPS SCREWDRIVER
ROLL OF TEFLON
TAPE (USE ONLY ON
WATER HEATER
CONNECTIONS)
GARDEN HOSE 6 FOOT TAPE

ACCESSORIES AND TOOLS NEEDED

DRILL
TIN SNIPS
PIPE DOPE
(SQUEEZE TUBE)
USE FOR WATER AND GAS
CONNECTIONS
PIPE WRENCH
DRAIN PANS AVAILABLE IN 22" (559 mm) DIAMETER (PART
NO. 9001609) FOR WATER HEATERS HAVING A DIAMETER 20"
(508 mm) OR LESS, 24" (610mm) DIAMETER (PART NO. 9002769)
FOR WATER HEATERS HAVING A DIAMETER 22" (559 mm) OR LESS
AND 28" (711 mm) DIAMETER (PART NO. 9001608) FOR WATER
HEATERS HAVING A DIAMETER 26" (660 mm) OR LESS.
Additional Tools Needed
When Sweat Soldering
• Tubing Cutters or Hacksaw
• Propane Tank
• Soft Solder
• Solder Flux
• Emery Cloth
• Wire Brushes
TUBING CUTTER
HACKSAW
3/4" (19 mm) WIRE BRUSH
1/2" (13 mm) WIRE BRUSH
6
PROPANE
TORCH
ROLL OF
EMERY CLOTH
ROLL OF LEAD-FREE SOLDER
SOFT SOLDER FLUX