Computer Screen Problems - IBM Thinkpad TransNote Service And Troubleshooting Manual

4. Click the Enable hibernation... button. (For Windows 2000, check the
Enable hibernate support check box.)
5. Click the Create Now button. (For Windows 2000, this is not required.)
The computer cannot enter hibernation mode if you are using one of the IBM
communication PC Cards. To enter hibernation mode, stop the communication
program, and then remove the PC Card or disable the PC Card slot, using the
Control Panel.

Computer screen problems

Problem: The screen is blank.
Solution: Press Fn+F6 key to make the screen brighter. If you still have the
problem persists, do the "Solution" in the problem below.
Problem: The screen is unreadable or distorted.
Solution: Make sure that:
v The display device driver is installed correctly.
v The display resolution and color depth are correctly set.
v The monitor type is correct.
To check these settings, do as follows:
1. Click Start
2. Double-click Display. The Display Properties window opens.
3. Click the Settings tab.
4. Check if the color depth and resolution are correctly set.
5. Click Advanced....
6. Click the Adapter tab.
7. Make sure "ATI RAGE MOBILITY-M PCI" is shown in the adapter
information window.
8. Click the Monitor tab.
9. Make sure the information is correct.
Problem: Incorrect characters appear on the screen.
Solution: Did you install the operating system or application program
correctly? If they are installed and configured correctly, have the computer
serviced.
Problem: The screen stays on even after you turn off your computer.
Settings Control Panel.
Chapter 4. Solving computer problems
31