Denon AVR-1803 Operating Instructions Manual page 24

ENGLISH
DSP surround simulation
• To operate the surround mode and surround parameters from the remote control unit.
1
Select the surround mode for the input channel.
(Remote control unit)
The surround mode switches in the following
order each time the DSP SIMULATION button is
pressed:
MONO MOVIE ROCK ARENA
MATRIX VIDEO GAME JAZZ CLUB
2
To enter the surround parameter setting mode, press the SURROUND
PARAMETER button.
• The surround parameter switches in the following order each time the
SURROUND PARAMETER button is pressed for the different surround
(Remote control unit)
modes.
3
Display the parameter you want to adjust, then use the
buttons to set it.
(1) ROOM SIZE
Use the
ROOM SIZE MED
(Remote control unit)
(2) EFFECT LEVEL
Use the
EFFECT LEVEL 10
(Remote control unit)
24
1
4
3
• ROCK ARENA
• JAZZ CLUB
• VIDEO GAME
• MONO MOVIE • MATRIX • VIRTUAL
ROOM SIZE DELAY D. COMP.
EFFECT DEFAULT DEFAULT
DEFAULT
(left) and
(left) and (right) buttons to set the room size.
(Initial)
SMALL MED-S MED
(left) button (right) button
(left) and (right) buttons to set the effect level.
(Initial)
1 10 15
(left) button (right) button
(3) DELAY TIME
(Remote control unit)
(4) D. COMP.
(Remote control unit)
2
(5) DEFAULT
3
(Remote control unit)
4
(Remote control unit)
(right)
MED-L LARGE
Use the (left) and (right) buttons to set the delay time.
(Initial)
0ms 30ms
DELAY 30ms
(left) button
Use the (left) and (right) buttons to set the D. COMP.
(Initial)
OFF LOW
D.COMP. OFF
(left) button
NOTE: This parameter is displayed during DOLBY DIGITAL playback.
To reset the settings to the factory defaults, use the
buttons to display "Yes".
YES Y/N
DEFAULT Y/N
(left) button
Press the ENTER button to finish surround parameter mode.
110ms
(right) button
MID HI
(right) button
(left) and (right)
NO
(right) button